Arp Cli Commands - Avaya C360 Installation And Configuration Manual

Avaya C360 Layer 3 Features

ARP CLI Commands

174 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Add a permanent entry to the
Address Resolution Protocol
(ARP) cache
Configure the amount of time
that an entry remains in the ARP
cache
Set the amount of time that an
entry remains in the ARP cache
back to default
Set the maximum number of
ARP cache entries allowed in
the ARP cache
Set the maximum number of
ARP cache back to default
Enable proxy ARP on an
interface
Disable proxy ARP on an
interface
Delete all dynamic entries from
the ARP cache and the IP route
cache
Display the Address Resolution
Protocol (ARP) cache
Display the IP address of a host,
based on a known MAC address
Use the following command...
arp
arp timeout
no arp timeout
ip max-arp-entries
no ip max-arp-entries
ip proxy-arp
no ip proxy-arp
clear arp-cache
show ip arp
show ip reverse-arp