Views; Snmp Commands - Avaya C360 Installation And Configuration Manual

- AuthNoPriv
- AuthPriv
View names:
●
- Read - Allow read-only access to a specified list of Object IDs (OIDs) in the MIB tree.
- Write - Allow read-write access to a specified list of OIDs in the MIB tree.
- Notify - Allow SNMP notifications from a specified list of OIDs to be sent.

Views

Each view consists of a name and a list of OIDs in the MIB tree. This list can be created using
multiple "snmp-server view" commands to either add OIDs to the list or exclude OIDs from a list
of all of the OIDs in the switch's MIB tree.
You can use wildcards to include or exclude an entire branch of OIDs in the MIB tree, using an
asterisk instead of the specific node.
To create an SNMPv3 view, you must provide the following information:
ViewName - a string of up to 32 characters representing the name of the view.
●
ViewType - Indicates whether the specified OID is included or excluded from the view.
●
OIDs - A list of the OIDs accessible using the view.
●

SNMP Commands

The following SNMP commands are available.
Table 16: SNMP CLI Commands 1 of 3
In order to...
Enable SNMP access to the
device
Disable SNMP access to the
device
Enable SNMPv1 access to the
device
Disable SNMPv1 access to the
device
Use the following command...
ip snmp
no ip snmp
snmp-server community
no snmp-server community
SNMP Support
1 of 3
Issue 1 July 2006 77