Chapter 4: Powering Up the Avaya C360
This chapter describes the procedures for powering up C360 switches.
Connecting the C360 to the main electrical supply provides power to the switch and for Power
over Ethernet (PoE).
!
WARNING:
To isolate the switch completely, you must disconnect all power connections (AC
WARNING:
plug, DC power and DC BUPS power).
!
ADVERTENCIA:
Para aislar el equipo totalmente desconecte todas las conexiones de energía
ADVERTENCIA:
(Enchufe de CA, fuente de CC y fuente de CC del BUPS)
Figure 16: C360 Back Panel
1
Figure notes:
1. AC Input
2. BUPS DC Input
2
Issue 1 July 2006
49