Policy Configuration; Policy Configuration Overview - Avaya C360 Installation And Configuration Manual

Avaya C360 Layer 3 Features

Policy Configuration

Policy Configuration Overview

The C360 supports QoS (Quality of Service) by using multiple priority levels and IEEE 802.1p
priority tagging to ensure that data and voice receive the necessary levels of service.
The C360 can enforce QoS policy on routed packets and change their 802.1p priority, according
to the following criteria:
180 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Set the virtual router
advertisement timer value (in
seconds) for the virtual router ID
Set the virtual router priority
value used when selecting a
master route
Set or disable the virtual router
simple password authentication
for the virtual router ID.
Configure or disable the router
to preempt a lower priority
master for the virtual router ID
Set the primary address that
shall be used as the source
address of VRRP packets for
the virtual router ID
Accept or discard packets
addressed to the IP address(es)
associated with the virtual
router, such as ICMP, SNMP,
and TELNET (if it is not the IP
address owner)
Display VRRP information
Display full VRRP-related
information
Use the following command...
ip vrrp timer
ip vrrp priority
ip vrrp auth-key
ip vrrp preempt
ip vrrp primary
ip vrrp override addr owner
show ip vrrp
show ip vrrp detail
2 of 2