Chapter 9: Avaya C360 Layer 3 Features; Obtaining And Activating A License Key - Avaya C360 Installation And Configuration Manual

Chapter 9: Avaya C360 Layer 3 Features

This section describes the C360 Layer 3 features. It provides the basic procedures for
configuring the C360 for Layer 3 operation.

Obtaining and Activating a License Key

●
What is Routing?
●
Routing Configuration
●
IP Configuration
●
RIP (Routing Interchange Protocol) Configuration
●
OSPF (Open Shortest Path First) Configuration
●
Static Routing Configuration
●
Route Redistribution
●
ARP (Address Resolution Protocol) Table Configuration
●
BOOTP/DHCP (Dynamic Host Configuration Protocol) Relay Configuration
●
NetBIOS Re-broadcast Configuration
●
VRRP (Virtual Router Redundancy Protocol) Configuration
●
Policy Configuration
●
IP Fragmentation and Reassembly
●
Layer 3 features only apply to the C360 operating in router mode. You must purchase a Routing
License Key Certificate for the C360 and activate the feature in order to operate in router mode.
Refer to Obtaining and Activating a License Key
Obtaining and Activating a License Key
Each Certificate is specific for:
The switch type.
●
The required feature.
●
The number of devices.
●
After you purchase a Routing Licence Key Certificate, you must obtain and activate a Routing
License Key.
on page 151 for further information.
Issue 1 July 2006 151