Chapter 8: Avaya C360 Layer 2 Features
This section describes the C360 Layer 2 features. It provides the basic procedures for
configuring the C360 for Layer 2 operation.
The C360 supports a range of Layer 2 features. Each feature has CLI commands associated
with it. These commands are used to configure, operate, or monitor switch activity for each of
the Layer 2 features.
This section of the C360 Installation and Maintenance Guide explains each of the features.
Specifically, the topics discussed here include:
Ethernet
●
VLANs
●
IEEE 802.1x (Port Based Network Access Control)
●
Spanning Tree Protocol
●
MAC Security
●
LAG (Link Aggregate Group)
●
Port Redundancy
●
IP Multicast Filtering
●
RMON
●
SMON
●
Port Mirroring
●
Weighted Queuing
●
LLDP Server
●
Issue 2 July 2005
113