Avaya C360 Installation And Configuration Manual page 126

Avaya C360 Layer 2 Features
126 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Display all the port dot1x
statistics
Set the minimal idle time
between authentication attempts
Set the time interval between
attempts to access the
Authenticated Station
Set the server retransmission
timeout period for all ports
Set the authentication period (an
idle time between
re-authentication attempts)
Set the
authenticator-to-supplicant
retransmission timeout period
(the time for the switch to wait
for a reply from the
Authenticated Station)
Set the max-req for all ports (the
maximal number of times the
port
tries to retransmit requests to
the Authenticated Station before
the session is terminated)
Globally enable/disable 802.1x
Set dot1x control parameter per
port
Initialize port dot1x
Set the port to re-authenticate
Set dot1x re-authentication
mode per port
Set the 802.1x quiet period per
port
Set the transmit period per port
(a time interval between
attempts to access the
Authenticated Station)
Use the following command...
show port dot1x statistics
set dot1x quiet-period
set dot1x tx-period
set dot1x server-timeout
set dot1x re-authperiod
set dot1x supp-timeout
set dot1x max-req
set dot1x system-auth-control
enable/disable
set port dot1x port-control
set port dot1x initialize
set port dot1x re-authenticate
set port dot1x re-authentication
set port dot1x quiet-period
set port dot1x tx-period
2 of 3