Avaya C360 Installation And Configuration Manual page 107

- Log file – Informational
- Console – Informational
- Telnet/SSH session – Warning
System Logging Commands
●
Tip:
The system logging configuration is not saved to NVRAM. The configuration only
Tip:
affects the active session from which the commands are executed. Each session
must be configured separately.
Clearing the system log file.
●
Tip:
Resetting the device does not clear the log file.
Tip:
Use the CLI commands briefly described below for configuring System Logging. The rules of
syntax and output examples are all set out in detail in the Reference Guide for the Avaya C360
Converged Stackable Switch, 10-300506.
In order to...
Define a filter rule for logging
messages for the current
session
Enable or disable logging for the
current session
Display the logging configuration
for the current session
Define a filter rule for logging
messages for a Syslog server
Enable or disable logging for a
Syslog server
Update the server facility
parameter of a configured
Syslog server
Update the server severity
parameter of a configured
Syslog server
Use the following command...
set logging session condition
set logging session {enable |
disable}
show logging session condition
set logging server condition
set logging server {enable |
disable}
set logging server facility
set logging server severity
System Logging
1 of 2
Issue 1 July 2006 107