Safety Summary; Product Identification - Intermec EasyCoder PM4i User Manual

Safety Summary

Intermec assumes no responsibility regarding the CE Directive if the
printer is handled, modified, or installed in any way other than that
described in Intermec's manuals.
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side doors are open, so ensure that
the doors are closed before you operate the printer.
• Do not open the front/left-hand electronics cover. Dangerous voltage!
If you open the electronics cover, you will void the warranty
and may cause damage to the internal components. Open-
ing the electronics cover exposes the user to shock hazards
which may result in injury or death.
• Do not remove the bottom plate. Dangerous voltage!
• Do not put your fingers inside the print mechanism when the power
is on.
• Make sure that the side door cannot unintentionally swing down
when you have your fingers or hands inside the media compartment.
Risk of injury because of the weight of the side door!
• Place the printer on an even surface which can support its weight of
approximately 13.5 kg (30 pounds) plus supplies.
• Do not spray the printer with water. If you are using a hose to clean
the premises in an industrial environment, remove the printer or pro-
tect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a clean-
ing card.

Product Identification

The machine label is attached to the printer's rear plate and contains
information on type, model, and serial number as well as AC voltage. It
also contains various signs of approval.
Intermec EasyCoder PM4i—User's Guide (Fingerprint version)
Chapter —Introduction