3-Inch Adapter; Label Taken Sensor; Real Time Clock; External Keyboard Converter - Intermec EasyCoder PM4i User Manual

Chapter —Options

3-inch Adapter

The 3-inch/76 mm adapter is used with a rotating media supply hub and
makes it possible to use media rolls with 3 inch/76 mm inner diameter
cores. The adapter is pressed onto the hub and secured by a screw. Not
used with a media supply roll post. Installed by the operator.

Label Taken Sensor

The Label Taken Sensor (LTS) is a photoelectric sensor that detects if
the latest printed label has been removed before printing another copy.
The LTS can be enabled or disabled by means of the instructions LTS&
ON and LTS& OFF respectively in Intermec Fingerprint and the Direct
Protocol. The LTS cannot be used in connection with a paper cutter.

Real Time Clock

The Real Time Clock circuit (RTC) relieves the operator or the host from
having to set the clock/calendar using the Intermec Fingerprint instruc-
tions DATE$ and TIME$ after each power up. The RTC has its own
backup battery that will last 10 years or more.

External Keyboard Converter

With this simple converter, a standard ps2 keyboard can be connected to
the printer's serial port.

Internal Fan-Fold Guide

This guide facilitates media load from an external supply to the rear of
the printer and provides superior guiding of the media. It cannot be used
in connection with peel-off (self-strip) operation and cannot be com-
bined with a label slack absorber, which may restrict the maximum print
speed somewhat.

Side Door with Keylock

If the media is valuable or sensitive, such as tickets, you can install a side
door that can be locked with a key. Can be installed by the operator.
 Intermec EasyCoder PM4i—User's Guide (Fingerprint version)