Intermec EasyCoder PM4i User Manual page 83

• Update firmware is used to directly upgrade the firmware of a specific
printer from a new firmware version stored as a file in a PC. If the
printer is equipped with an EasyLAN Ethernet or Wireless board,
the user must have access rights to upgrade the firmware, see the
EasyLAN User's Guide.
If the CompactFlash card or upgrade file contains an earlier
firmware version than the one in the printer, the printer's
firmware will be downgraded without warning.
Firmware upgrade files can be found on www.intermec.com or be
obtained from your local Intermec distributor.
Reboot
Corresponds to cycling the power to the printer. To exit Intermec Shell
without having selected any application, select Reboot. Then wait for the
5 seconds countdown to finish, and the last selected application will be
opened.
Intermec EasyCoder PM4i—User's Guide (Fingerprint version)
Chapter —Intermec Shell Startup Program