Intermec EasyCoder PM4i User Manual page 152

Appendix E—Setup Mode Overviews
Setup Mode; Media
(Intermec Fingerprint v8.70)
Continued from SETUP:
the previous page
MEDIA
MEDIA:
MEDIA SIZE
MEDIA SIZE:
XSTART
XSTART:
[24]:
MEDIA:
PAPER TYPE
PAPER TYPE:
TRANSFER
TRANSFER:
RIBBON CONSTANT
RIBBON CONSTANT:
[90]:
PAPER TYPE:
DIRECT THERMAL
DIRECT THERMAL:
LABEL CONSTANT
LABEL CONSTANT
[85]:
MEDIA:
TESTFEED
TESTFEED:
[26 28 0 10]
Press <Enter> to per-
form a testfeed.
Values are read-only.
40
MEDIA SIZE:
WIDTH
WIDTH:
[832]:
TRANSFER:
RIBBON FACTOR
RIBBON FACTOR:
[25]:
DIRECT THERMAL:
LABEL FACTOR
LABEL FACTOR:
[40]:
MEDIA:
TESTFEED MODE
TESTFEED MODE:
FAST
TESTFEED MODE:
SLOW
Scroll forward
Scroll back
Intermec EasyCoder PM4i—User's Guide (Fingerprint version)
MEDIA:
MEDIA TYPE
MEDIA SIZE: MEDIA TYPE:
LENGTH LABEL (w GAPS)
MEDIA TYPE:
TICKET (w MARK)
MEDIA TYPE:
TICKET (w GAPS)
MEDIA TYPE:
LENGTH:
FIX LENGTH STRIP
MEDIA TYPE:
[1200]:
VAR LENGTH STRIP
TRANSFER: TRANSFER:
LABEL OFFSET RIBBON SENSOR
LABEL OFFSET: RIBBON SENSOR:
[0]: [14]:
Only displayed if a paper sensor is installed.
MEDIA: MEDIA:
CONTRAST PAPER
PAPER:
PAPER SENSOR
CONTRAST: PAPER SENSOR:
+0% [10]:
CONTRAST:
+2%
CONTRAST:
+4%
CONTRAST:
+6%
CONTRAST:
+8%
CONTRAST:
+10%
CONTRAST:
-10%
CONTRAST:
-8%
CONTRAST:
-6%
CONTRAST:
-4%
CONTRAST:
-2%
Scroll forward
Scroll back
MEDIA:
LEN (SLOW MODE)
LEN (SLOW MODE):
[0]:
Continued on
the next page
Scroll forward
Scroll back
TRANSFER:
LOW DIAMETER
LOW DIAMETER:
[0]:
PAPER:
LOW DIAMETER
LOW DIAMETER:
[0]: