Attachment Of Timing Pulley D; Attachment Of Feed Supporting Plate - Brother CE-5500PRW Service Manual

Application of Assembly
7

Attachment of Timing pulley D

1. Insert the timing pulley D 1 into the lower shaft assy. and then tighten the
2 screws 1 temporarily.
*Key point
• Insert it until the timing pulley D 1 hits the retaining ring E6.
• Fully tighten the screw 1 after performing "4 - 10 Adjustment :
Needle bar rising".
1
8

Attachment of Feed supporting plate

1. Set the feed supporting plate 1 to the feed arm B assy. 2.
*Key point
• Check that the protrusion 3 of the feed supporting plate 1
engaged with the groove 4 of the feed arm B assy. 2.
2. Set the feed supporting plate B 5 to the feed supporting plate 1, attach
the feed arm B assy. 2 with the screw 1.
*Key point
• Check that the boss of the feed supporting plate B 5 engaged
with the positioning hole of the feed supporting plate 1.
• Check that sandwich the feed cam 6 with the feed supporting
plate 1 and the feed arm B assy. 2.
Apply EPNOC AP (N) 0 to the horizontal feed cam
surface.
1
Feed and rotary module
Set Screw, Socket (CP)
M5X5 Hand start
Small amount
Screw, Bind
M3X6 0.78 – 1.18 N·m
Torque
XC8387***
Torque
1 1
Retaining ring E6
1 5
6 2
1
4
3
3 - 71