Download  Print this page

Removal Of Tension Pulley Assy (timing Belt) - Brother 888X62 Series Service Manual

Hide thumbs


Basic of Disassembly

Removal of Tension pulley assy (timing belt)

1. Remove the screw (screw, pan (S/P washer) M4x12) and the nut 2 M4 to remove the tension pulley
assy from the arm bed.
2. Remove the timing belt from the lower shaft assy and the upper shaft assy.
Nut 2 M4
Lower shaft assy
Upper shaft, Needle-presser module
Upper shaft assy
Timing belt
2 - 21
Tension pulley assy
Screw, pan
(S/P washer)
Screw, Pan (S/P washer) M4X12


Table of Contents

   Related Manuals for Brother 888X62 Series

Comments to this Manuals

Symbols: 0
Latest comments: