Download  Print this page

Does Not Operate When The Foot Controller Is Used - Brother CE-5500PRW Service Manual

Computerized.
Hide thumbs

Advertisement

Failure Investigation
for Electronic Parts

Does not operate when the foot controller is used.

Is the resistance between pin 2 and 3 on the
foot controller jack assy. connector normal?
• Foot controller disconnected : 1Ω or less
• Foot controller connected : more than 1MΩ
When the foot controller is connected
and press down the foot controller,
does the resistance between pin 1
and 3 on the foot controller jack assy.
connector 1K-51KΩ?
5 - 16
Does not operate when the foot controller is used
Y
Y
Replace the main PCB assy.
N
Replace the foot controller
jack assy.
N
Replace the foot controller.
or
Replace the foot controller
jack assy.

Advertisement

Table of Contents

   Related Manuals for Brother CE-5500PRW

Comments to this Manuals

Symbols: 0
Latest comments:
  • Debbie Doebley Sep 04, 2018 10:52:
    I have the Brothers sewing machine CP6500, only got Spanish manual with the machine and I do not speak, etc Spanish. I was sewing with my machine then had to change the tension and now I am having a lot of trouble getting it to work properly again, thread from bobbin bunches up(?), Is there any way I can get the manual in English so I can try to get my machine working properly again? I would really appreciate any help you can give me. If need to you can email @ debbiedoeb​ley@aol.co​m. My home address is 3122 Belgreen Place, Philadelph​ia, Pa 19154. Thank You!