Brother CE-5500PRW Service Manual page 32

Basics of Assembly
1
Attachment of Bobbin winder assy
1. Set the shaft of the bobbin winder assy. 1 to the positioning part of the
rear cover assy. with the 2 screws 1.
2. Insert the BW switch lever 2 into the positioning hole of the bobbin
winder shaft stopper 3.
3. Place the bobbin winder shaft spring 4 and the bobbin winder shaft
stopper 3, and secure it with the screw 2.
*Key point
• Check that the bobbin winder assy. 1 pass over the bobbin
winder shaft spring 4 when the bobbin winder is switched.
• Check that the bobbin winder spring 4 return to the original
position when the bobbin winder is switched.
→ Refer to 3 - 64 "Bobbin winder mechanism".
1
2
Bobbin winder mechanism
Giza Tite
M5X16
1.18 – 1.57 N·m
2
Torque
3
1
1
2 4
2 - 17