Removal Of Front Cover Assy - Brother CE-5500PRW Service Manual

Basics of Disassembly
5

Removal of Front cover assy

1. Lower the presser lever 1.
2. Remove the screw 1 from the side of the front cover and remove the
screw 2, 2 screws 3 and 5 screws 4 from the side of the rear cover, and
then remove the front cover assy. 2.
3. Remove the lead wires from the guide parts of the shutter cover 3.
4. Remove the connector of the operation PCB sub assy. 4 and the connector
of the SSVR PCB assy. 5 from the main PCB 6.
→ Refer to 3 - 4 "Disassembly of Front cover assy".
Main parts
1 2
1
3 2
4
4 5
6
3 2
2 - 5