Download  Print this page

Attachment Of Fpm Holder Sub Assy - Brother CE-5500PRW Service Manual

Computerized.
Hide thumbs

Advertisement

Application of Assembly
17

Attachment of FPM holder sub assy

1. Attach the rubber 2 from the FPM holder sub assy. 1.
2. Set the FPM holder sub assy. 1 to the shaft 3 of the base plate assy., and
then attach the retaining ring 10.
*Key point
• Check that the feed adjusting 4 is the upper side of the FPM
gear 5.
3. Sandwich the spring
base plate assy., and then tighten the screw 1.
*Key point
• Tighten the screw 1 until the screw hole 6 in the base plate
assy. comes approximately to the center of the positioning
hole 7 in the FPM holder sub assy. 1.
4. Tighten the screw 2 temporarily.
*Key point
• Fully tighten the screw 2 after performing "4 - 15 Adjustment :
Feed forward/backward".
1
2
S06
3 - 76
Feed and rotary module
between the FPM holder sub assy. 1 and the
S06
Bolt, Socket
M4X25
Screw
3X8
21
5
1
Torque
-
Torque
Hand start
SPRING
XC2537***
1
2
5
4
3
Retaining ring 10
1
S06
7
6
2

Advertisement

Table of Contents

   Related Manuals for Brother CE-5500PRW

Comments to this Manuals

Symbols: 0
Latest comments:
  • Debbie Doebley Sep 04, 2018 10:52:
    I have the Brothers sewing machine CP6500, only got Spanish manual with the machine and I do not speak, etc Spanish. I was sewing with my machine then had to change the tension and now I am having a lot of trouble getting it to work properly again, thread from bobbin bunches up(?), Is there any way I can get the manual in English so I can try to get my machine working properly again? I would really appreciate any help you can give me. If need to you can email @ debbiedoeb​ley@aol.co​m. My home address is 3122 Belgreen Place, Philadelph​ia, Pa 19154. Thank You!