Download  Print this page

Error Message Is Displayed - Brother CE-5500PRW Service Manual

Computerized.
Hide thumbs

Advertisement

Failure Investigation
for Electronic Parts
After the power supply PCB assy. is
replaced, start the test mode and
select the test mode "10" and press
the reverse/reinforcement stitch
button.
Does the motor correctly rotate
after turning off and on the power?
Is one of the start/stop button, reverse/reinforcement
stitch button and needle position button stuck in a
pressed down condition?
* In the case of models not equipped with the start/stop button.
Is the reverse/reinforcement stitch button stuck in a
pressed down condition?
Release the button that is stuck.

Error message is displayed

"F1" is displayed.
Y
OK
"F2" is displayed.
Y
Replace the main PCB assy.
N
or
Replace the power supply
PCB assy.
Replace the SSVR PCB assy.
N
or
Replace the main PCB assy.
5 - 3

Advertisement

Table of Contents

   Related Manuals for Brother CE-5500PRW

Comments to this Manuals

Symbols: 0
Latest comments:
  • Debbie Doebley Sep 04, 2018 10:52:
    I have the Brothers sewing machine CP6500, only got Spanish manual with the machine and I do not speak, etc Spanish. I was sewing with my machine then had to change the tension and now I am having a lot of trouble getting it to work properly again, thread from bobbin bunches up(?), Is there any way I can get the manual in English so I can try to get my machine working properly again? I would really appreciate any help you can give me. If need to you can email @ debbiedoeb​ley@aol.co​m. My home address is 3122 Belgreen Place, Philadelph​ia, Pa 19154. Thank You!