Download  Print this page

Inner Rotary Hook Bracket Position - Brother CE-5500PRW Service Manual

Computerized.
Hide thumbs

Advertisement

Adjustment
[Adjustment standard]
The clearance (overlap) between the inner rotary hook point and the bracket spring must be 2.3 to 2.5mm.
[Adjustment procedure]
1. Remove the front cover.
2. Set the inner rotary hook assy. in the outer rotary hook.
3. Loosen the screw (screw pan (S/P washer) M3 x 8) of the inner rotary hook bracket assy..
4. Move the inner rotary hook bracket assy. back and forth, to adjust the clearance (overlap) between the inner rotary
hook point and the bracket spring to 2.3 to 2.5mm.
5. Tighten the screw (screw pan (S/P washer) M3 x 8) of the inner rotary hook bracket assy..

Inner rotary hook bracket position

Screw pan (S/P washer) M3 x 8
2.3 - 2.5mm
4 - 21

Advertisement

Table of Contents

   Related Manuals for Brother CE-5500PRW

Comments to this Manuals

Symbols: 0
Latest comments:
  • Debbie Doebley Sep 04, 2018 10:52:
    I have the Brothers sewing machine CP6500, only got Spanish manual with the machine and I do not speak, etc Spanish. I was sewing with my machine then had to change the tension and now I am having a lot of trouble getting it to work properly again, thread from bobbin bunches up(?), Is there any way I can get the manual in English so I can try to get my machine working properly again? I would really appreciate any help you can give me. If need to you can email @ debbiedoeb​ley@aol.co​m. My home address is 3122 Belgreen Place, Philadelph​ia, Pa 19154. Thank You!