Download  Print this page

Pattern Cannot Be Sewn Correctly - Brother CE-5500PRW Service Manual

Computerized.
Hide thumbs

Advertisement

Failure Investigation
for Electronic Parts

Pattern cannot be sewn correctly.

With the power OFF, can you move the
needle bar to the left and right by hand
lightly?
Is the resistance between pin 1 and
2, 3 and 4 on the Z and F pulse
motor connector 6.7-7.7Ω?
Is the Z pulse motor connector
connected to the main PCB assy.
(CN8) correctly?
Is the F pulse motor connector
connected to the main PCB assy.
(CN10) correctly?
Is the main PCB assy. attached
correctly?
(Is the BW switch OFF?)
Replace the main PCB assy.
Pattern cannot be sewn correctly
Y
Y
Y
Y
N
Attach the needle-presser
module correctly.
N
Replace the pulse motor.
N
Connect it correctly.
N
Attach the main PCB assy.
correctly.
5 - 13

Advertisement

Table of Contents

   Related Manuals for Brother CE-5500PRW

Comments to this Manuals

Symbols: 0
Latest comments:
  • Debbie Doebley Sep 04, 2018 10:52:
    I have the Brothers sewing machine CP6500, only got Spanish manual with the machine and I do not speak, etc Spanish. I was sewing with my machine then had to change the tension and now I am having a lot of trouble getting it to work properly again, thread from bobbin bunches up(?), Is there any way I can get the manual in English so I can try to get my machine working properly again? I would really appreciate any help you can give me. If need to you can email @ debbiedoeb​ley@aol.co​m. My home address is 3122 Belgreen Place, Philadelph​ia, Pa 19154. Thank You!