Alignment Of F Gear Teeth; Attachment Of Spring - Brother CE-5500PRW Service Manual

Application of Assembly
18

Alignment of F gear teeth

1. Turn the F pulse motor gear 1 clockwise until the stopper 2 of the F
pulse motor gear 1 on it touches the rubber 3.
2. Align the teeth of the feed adjusting assy. 4 with the teeth of the F gear
5, and then mesh it and the F pulse motor gear 1.
*Key point
• Check that the match mark 6 of the F gear 5 and the match
mark 7 of the F pulse motor gear 1 are together.
Apply EPNOC AP (N) 0 to the all of the teeth on
the feed adjusting assy. F gear.
19

Attachment of Spring

1. Attach the spring S07
S07
A decided hook form is same
Feed and rotary module
to the FPM holder assy. 1 and the feed bar 2.
28.0
Bead
XC8387***
5
1
SPRING
XE1478***
3
2 1
4 1
5
1
6 7
2
S07
3 - 77