Download  Print this page

Advertisement

Adjustment
[Adjustment standard]
• No uneven bobbin winding.
• The target for the bobbin winding quantity must be filling 80 to 90% of the diameter.
[Adjustment procedure]
1. Loosen the screw (screw pan (S/P washer) M3 x 8) of the thread guide assy..
2. Move the thread guide assy. up and down, to adjust uneven bobbin winding.
3. Tighten the screw (screw pan (S/P washer) M3 x 8) of the thread guide assy..
*Key point
• When the uneven bobbin winding is upper side, move the thread guide assy. down.
• When the uneven bobbin winding is lower side, move the thread guide assy. up.
4. Loosen the screw (screw pan (S/P washer) M3 x 20) of the bobbin presser.
5. Turn the bobbin presser left and right, to adjust the winding quantity.
6. Tighten the screw (screw pan (S/P washer) M3 x 20) of the bobbin presser.
*Key point
• The target for the bobbin winding quantity is filling 80 to 90% of the diameter.
NOTE
• The large side of the bobbin presser must be at the front cover side.
Screw pan (S/P washer) M3 x 20
4 - 16

Bobbin winder

Move the thread
guide assy. down.
Move the thread
guide assy. up.
Bobbin presser
Thread guide assy.
Screw pan (S/P washer) M3 x 8

Advertisement

Table of Contents

   Related Manuals for Brother CE-5500PRW

Comments to this Manuals

Symbols: 0
Latest comments:
  • Debbie Doebley Sep 04, 2018 10:52:
    I have the Brothers sewing machine CP6500, only got Spanish manual with the machine and I do not speak, etc Spanish. I was sewing with my machine then had to change the tension and now I am having a lot of trouble getting it to work properly again, thread from bobbin bunches up(?), Is there any way I can get the manual in English so I can try to get my machine working properly again? I would really appreciate any help you can give me. If need to you can email @ debbiedoeb​ley@aol.co​m. My home address is 3122 Belgreen Place, Philadelph​ia, Pa 19154. Thank You!