Download  Print this page

Advertisement

Basics of Assembly
1
Attachment of Needle presser unit
1. Set the needle presser unit 1 to the positioning part of the inside of the
rear cover with the 2 screws 1.
2. Tighten the screw 2 from the outside of the rear cover assy..
3. Attach the label.
→ Refer to 3 - 80 "Needle-presser module".
1
2
Needle bar, presser mechanism / Upper shaft mechanism
Giza Tite
M5X20
1.18 – 1.57 N·m
Screw, Bind
M3X25
Hand start
Torque
Torque
1
1
2
2 - 21

Advertisement

Table of Contents

   Related Manuals for Brother CE-5500PRW

Comments to this Manuals

Symbols: 0
Latest comments:
  • Debbie Doebley Sep 04, 2018 10:52:
    I have the Brothers sewing machine CP6500, only got Spanish manual with the machine and I do not speak, etc Spanish. I was sewing with my machine then had to change the tension and now I am having a lot of trouble getting it to work properly again, thread from bobbin bunches up(?), Is there any way I can get the manual in English so I can try to get my machine working properly again? I would really appreciate any help you can give me. If need to you can email @ debbiedoeb​ley@aol.co​m. My home address is 3122 Belgreen Place, Philadelph​ia, Pa 19154. Thank You!