Brother CE-5500PRW Service Manual page 41

Basics of Assembly
3
Attachment of Foot controller jack assy
1. Insert the foot controller jack assy. 1 from the inside of the rear cover
assy..
2. Attach the jack nut 2 from the outside of the rear cover assy., and secure
the foot controller jack assy. 1.
*Key point
• Pass the lead wire of the foot controller jack assy. 1 between
the main motor sub assy. and the rear cover assy..
4
Attachment of Inlet assy
1. Set the inlet assy. 1 and the inlet presser 2 to the rear cover assy. with the
screw 1.
1
2 - 26
Electrical parts and motors
Taptite, Cup B
M4X14
Torque
0.78 – 1.18 N·m
1
2
1
1
2 1