Attachment Of Lower Shaft Assy - Brother CE-5500PRW Service Manual

Application of Assembly
4

Attachment of Lower shaft assy

1. Insert the set collar 2 to the lower shaft assy. 1, and then tighten the 2
screws 1 temporarily.
*Key point
• Check that the cut surface 3 of the set collar 2 is the out
side.
• Fully tighten the screw 1 after performing "3-70 Attachment of
Bushing presser B"".
2. Set the lower shaft assy. 1 to the base plate assy.
1
Feed and rotary module
Set Screw, Socket (CP)
M4X4 0.78 – 1.18 N·m
Torque
2 1 3
1
1
3 - 69