1. How to start test mode
• Turn on the power while pressing
key) in the state that continued pressing
beeps sound, and then test mode starts.
• In case of models not equipped with the buzzer, beep does not sound.
2. Mode selection
(Stitch selection keys) and select pattern number (mode).
3. Starting and stopping test mode
• In case of models not equipped with
4 - 2
Starting test mode/Starting and stopping operation
(Reverse/reinforcement stitch button), and press
(Reverse/reinforcement stitch button) within one second, four
(Start/stop button), press down and/or release the foot controller.