Figure 5-7 Boot Device Options Screen - Silicon Graphics 330 User Manual

Boot Device Options
007-4278-001
This option shows the target ID of the device you are booting from. The default setting
is 0 (zero). We recommend that you not change this setting. Some operating systems will
not run unless the boot device is set at zero.
The figure below shows the Boot Device Options screen.
Adaptec AIC-7899
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID . . . . . . . . . . . . . . . . . . . . . . .
SCSI Parity Checking . . . . . . . . . . . . . . . . . . . . . . . .
Host Adapter SCSI Termination . . . . . . . . . . . . . . . . . .
Select SCSI peripherals from which to boot Additional Options
Boot Device Options . . . . . . . . . . . . . . . . . . . . . . .
To view peripherals by ID# select "SCSI Disk Utilities" from previous menu
SCSI Device Configuration . . . . . . . . . . . . . . . . . . . .
Boot Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced Configuration Options . . . . . . . . . . . . . . . . .
Boot SCSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-----Options Listed Below Have NO EFFECT if Multiple Lun Support is Disabled-----
Boot Lun Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 5-7 Boot Device Options Screen
SCSISelect (TM)
AIC-7899 at Bus:Device 00:00h
Boot Device Configuration
*
Enabled
Disabled
<F6> - Reset to Host Adapter Defaults
SCSISelect Utility Options
Utility
7
Enabled
Enabled
Press <Enter>
Press <Enter>
A First
Press <Enter>
0
0
:default)
*
117