Figure 5-3 Configure/View Host Adapter Settings Screen (2 Of 2) - Silicon Graphics 330 User Manual

007-4278-001
Adaptec AIC-7899
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID . . . . . . . . . . . . . . . . . . . . . . .
SCSI Parity Checking . . . . . . . . . . . . . . . . . . . . . . . .
Host Adapter SCSI Termination . . . . . . . . . . . . . . . . . .
Additional Options
Boot Device Options . . . . . . . . . . . . . . . . . . . . . . .
SCSI Device Configuration . . . . . . . . . . . . . . . . . . . .
Advanced Configuration Options . . . . . . . . . . . . . . . . .
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 5-3 Configure/View Host Adapter Settings Screen (2 of 2)
Use the cursor (↑ ↓) to move to your selection. Press Enter to display a pop-up menu of
choices or to make selections. Press Esc at any time to return to the previous menu.
Note: Press F6 to reset all settings to the SCSI controller defaults. SCSI controller
default settings are marked with an asterisk (*) throughout the selection submenus.
SCSISelect (TM)
AIC-7899 at Bus:Device 00:00h
<F6> - Reset to Host Adapter Defaults
SCSISelect Utility Options
Utility
7
Enabled
Enabled
Press <Enter>
Press <Enter>
Press <Enter>
:default)
*
113