Scsiselect Configuration Utility; Scsi Configuration Utility; Overview; Default Values - Silicon Graphics 330 User Manual

5.
SCSI Configuration Utility

Overview

Default Values

007-4278-001
Chapter 5
SCSISelect Configuration Utility
This document contains information about the SCSISelect Configuration Utility.
The SCSISelect configuration utility allows you to change SCSI controller settings
without opening the computer or changing jumpers.
The following table lists the settings you can change with the SCSISelect utility and the
default value for each setting. Some settings apply globally to the SCSI controller and all
SCSI devices on the bus; other settings apply individually to each device on the bus.
Note: The Silicon Graphics 330 Visual Workstation is equipped with a dual SCSI channel
controller that enhances your system's performance and flexibility
Table 5-1 Default Settings for SCSI Controller and All Devices
Global Settings for SCSI Controller and All Devices
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination
Boot Channel/ Boot SCSI I/O
Default Value
7
Enabled
Automatic
A/0 (zero)
109