Table of Contents
Advertisement
13
Configuration Summary
Review the following details of your configuration.
Item
Management
Computer Address
14
Description
You can manage your Content Security
Management appliance from the
management port (P1) by entering
http://192.168.42.42, or the hostname
assigned to your appliance when you
have completed the System Setup
Wizard.
If you reset your configuration to
factory default settings (for example, by
re-running the System Setup Wizard),
you can only access the management
interface from the P1 port
(http://192.168.42.42), so ensure you
have a connection to the P1 port.
Also, verify that you open firewall ports
80 or 82 for HTTP, and 83 and 443 for
HTTPS on your management interface.
Remember to change your computer IP
address back to the original settings that
you noted in the
Settings" section on page
You can review a summary of your
system settings from the Management
Appliance > Centralized Services >
Security Appliances page.
"Document Network
4.
Advertisement
Table of Contents
