Table of Contents
Advertisement
4
4 USER INTERFACE
4.1 GETTING STARTED
The
DS8110/DX8210
DS8110/DX8210 User Interface is a browser-based application you will use to define
operating parameters, monitor read quality, construct output messages, and view
diagnostics. The User Interface enables you to easily configure, fine-tune, and monitor your
scanner's operation.
This User Interface provides ease-of-use for any operator level.
4.1.1 Prerequisites
Before setting up your barcode scanner you will need the following:
Computer
Laptop
Browser
Internet Explorer 11 (or later)
Firefox 30 (or later)
Chrome 36 (or later)
Java
Java version 8 (or later)
44
barcode
scanners
NOTE: If the Diagnostic | Monitor page does not run, you may
need to create an exception in the Java Control Panel.
To do this:
If the Diagnostic | Monitor page does not run, you may need to
create an exception in the Java Control Panel.
To do this:
1. Click the Start/Home button and type Configure Java in
the search field. Select the Java Control Panel from the
search results. The Java Control Panel opens.
2. Click the Security Tab to open it.
3. Under Exception Site List, click Edit Site List... The
Exception Site List window opens.
4. Click Add.
5. Enter the IP Address for the system/scanner in the field
provided as follows: http://10.27.154.125/ (but matching
your system's IP Address)
6.
Click OK. The Monitor page should now load.
DS8110 REFERENCE MANUAL
are
designed
for
ease-of-setup.
The
0.
Advertisement
Table of Contents
