Indicator Status In Normal Mode - Epson Stylus PRO 7000 Service Manual

EPSON Stylus Pro 7000

1.4.1 Indicator Status in Normal Mode

Table 1-24. Operate Indicator
Printer Status
With power on and in any status other
than those listed below.
While processing data and during power
off sequence
Fatal error
Reset, timer IC reset/NVRAM clear
Table 1-25. Paper Out Indicator
Printer Status
Out of paper, end of roll
Roll paper and sheet sizes are different
Paper set lever in release position
Paper is too thick to perform cleaning
Paper jam
Paper cutting error
Paper skew
Paper check error
Problem with paper eject (sheet)
Fatal error
Reset, timer IC reset/NVRAM clear
Product Description
Indicator
On
Flashing
Flashing
On
Indicator
On
On
On
On
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
On
Control Panel
Table 1-26. Pause Indicator
Printer Status
Ready
In SelecType mode
Paused
Ink drying phase
Ink charging sequence
Other errors
Fatal error
Reset, timer IC reset/NVRAM clear
Table 1-27. Ink Out Indicators
Printer Status
Out of specified ink
No I/C for specified ink
Wrong I/C for that slot
Ink low
Fatal error
Reset, timer IC reset/NVRAM clear
Revision B
Indicator
Off
Off
Off
Flashing
Flashing
Off
Flashing
On
Indicator
On
Flashing
Flashing
On
36