Epson Stylus PRO 7000 Service Manual page 119

EPSON Stylus Pro 7000
4.2.1.7 Paper Guide L2 Removal
1. From the front, remove four white screws (Truss:M4x6), and remove the
Paper Guide L2.
Paper
Guide
L2
Figure 4-18. Paper Guide L2 removal on right side
Two
screws
Figure 4-19. Paper Guide L2 removal on left side
Disassembly & Assembly
Two
screws
Paper
Guide
L2
Disassembly Flow
When replacing the Paper Guide L2, make sure the five tabs at
the top of the guide slide in between the metal and black
cushion. Then secure with the screws.
Paper
Guide L
Paper
Guide L2
If just one of the tabs is not inserted properly, roll paper will
most likely still feed normally, but cut sheets might not.
Revision B
Five tabs
119