Epson Stylus PRO 7000 Service Manual page 144

EPSON Stylus Pro 7000
6. Perform steps 1 and 2 of the "Replacing the Waste Ink Pads" on page 126.
7. Remove the four (CUPS M4x6) screws securing the Maintenance Base
Assembly to the printer main body and remove the Maintenance Base
Assembly.
Screw
(M4x6)
Figure 4-65. Removing the Maintenance Base Assembly - 1
Figure 4-66. Removing the Maintenance Base Assembly - 2
Disassembly & Assembly
(+) Screw
Driver
Screw (M4x6)
(+) Screw
Driver
Disassembly Flow
Maintenance
Base Assembly
Figure 4-67. Removing the Maintenance Base Assembly - 3
8. Shift the Maintenance Base Assembly to the left to release the joint with
the R Side Frame. Then, watching out for the harnesses, lower the
Maintenance Base Assembly and remove it.
Pump Motor
Assembly
Flushing Box
Assembly
Cleaner
Head
Pump
Assembly
Figure 4-68. Maintenance Base Assembly
Revision B
Screws (M4x6)
Cap Assembly
144