Epson Stylus PRO 7000 Service Manual page 128

EPSON Stylus Pro 7000
4.2.3.2 Removing the Suction Fans
1. Remove Paper Guide L2 as described in "Paper Guide L2 Removal" on
page 119.
2. Remove the Waste Ink Box from the printer as described in steps 1 to 3
only of "Replacing the Waste Ink Pads" on page 126.
3. Remove the two screws (CP(W):M4x8) and one screw (CP(W):M4x40)
securing the fan duct, and then remove the fan duct.
Suctions fans
One screw
One
screw
Figure 4-32. Suction Fan Removal
4. Disconnect the fan connector and harness.
5. Remove the one screw (CP(W):M4x8) securing the fan, and remove the
fan.
Disassembly & Assembly
Fan duct
Two
screws
Connector
Disassembly Flow
Revision B
128