Epson Stylus PRO 7000 Service Manual page 121

EPSON Stylus Pro 7000
4.2.1.9 Front Cover Removal
1. Open the Front Cover.
2. Push in the two hooks to the left of the cover and remove the front shaft
cover.
Spring catch
Front shaft
cover
Figure 4-22. Front Cover Removal 1/3
3. On the right, remove the E-ring and the spring.
Front cover
spring R
Front cover
support shaft
Figure 4-23. Front Cover Removal 2/3
Disassembly & Assembly
Front cover
E-ring
spring L
Front cover
Shaft cover
support shaft
hooks x2
E-ring
Spring catch
4. Remove the two resin stopper clips (white plastic) from the front cover
support shaft on the left, and then pull out the front cover support shaft to
the left. Be aware that the front cover spring L and Front Cover come free
at this time.
Front cover
support shaft
Figure 4-24. Front Cover Removal 3/3
Push the front cover support shaft back to the left to insert the
left plastic resin stopper.
5. Remove the Front Cover and front cover spring R from the front cover
support shaft.
Make sure you replace the front cover springs correctly.
Confirm the movement of the cover and operation of the
cover-open sensor. See "Cover Open Sensor Assembly"
on page 200 for details.
Disassembly Flow
Revision B
Front
cover
Two plastic
resin stoppers
121