Backup/Download Error Recovery; Range Of Backed Up Parameters - Epson Stylus PRO 7000 Service Manual

EPSON Stylus Pro 7000

BACKUP/DOWNLOAD ERROR RECOVERY

If an error occurs during the backup or download procedure, the following
message appears on the LCD.
If you see the message above, one of the following errors has occurred.
Flash memory/ write error
Flash memory/ erase error
PC card/ write error
PC card/ erase error
Using a different PC card, try the operation again. If a different PC card does
not solve the problem, there is a problem with the flash memory on the Main
Board and a backup is not possible. Replace the Main Board

RANGE OF BACKED UP PARAMETERS

The following parameters on the C299 Main Board are backed up during the
back up operation.
Flash ROM addresses 000~5FF (except for 120~13F)
Head Rank
Bi-D
Head Gap
Flushing Point (R)
Feed correction
P_REAR sensor position
Capping position
Adj Top/Bottom
Adjustment
End [Error]
Adjustment Steps
Revision B
161