Epson Stylus PRO 7000 Service Manual page 120

EPSON Stylus Pro 7000
4.2.1.8 Roll Paper Cover Removal
1. Open the Roll Paper Cover.
2. Remove two white screws (CPS:M4x8) securing the black spindle support
on the left, and then remove the spindle support.
Two
screws
Figure 4-20. Roll Paper Cover removal on left side
Disassembly & Assembly
3. Remove two white screws (CPS:M4x8) securing the gray spindle support
on the right, and then remove the spindle support.
Roll
Paper
Cover
Brake pin
Spindle
support
4. Remove the cover brake pin from either the left or right side, and remove
the cover.
Disassembly Flow
Roll
Paper
Cover
Brake pin
Spindle
support
Figure 4-21. Roll Paper Cover removal on right side
Revision B
Two
screws
120