Reliability; Environmental Conditions; Temperature/Humidity - Epson Stylus PRO 7000 Service Manual

EPSON Stylus Pro 7000

1.1.7 Reliability

Total print volume: 20,000 pages at A1 size
Printheads: 2,000,000,000 dots/nozzle
Cutter: Approximately 2,000 sheets (A1)
Maintenance parts: Approximately 12,000 sheets
Ink pad, Pump unit, Flushing box, Cap assembly,
and Head Cleaner are all included in the SP-7000
Maintenance Kit (P/N 1054038)
Product Description

1.1.8 Environmental Conditions

TEMPERATURE/HUMIDITY

See the following table.
Table 1-11. Environmental Conditions
Condition Temperature
10~35°C
Operating
(50~95°F)
-20~40°C
Storage
(-4~104°F)
-20~60°C
Transportation
(-4~140°F)
Notes:
1) When storing the printer, make sure the printheads are in the home (capped)
position. If necessary switch power on, wait for the printheads to move to the
home position, and then switch power off.
2) Before transporting the printer, remove the ink cartridges and turn the ink
valves screws to the closed position. Also make sure the printheads are in the
home, capped, position. After transporting the printer, install new ink
cartridges.
3) If the temperature drops below -15°C (5°F), the ink in the cartridges and
printheads freezes. The ink thaws completely after three hours at 25°C (77°F).
Humidity (%)
Figure 1-2. Print Temperature and Humidity
Features
Humidity
• Less than a month at
20~80%
40°C (104°F)
• Less than 120 hours at
20~85%
60°C (140°F)
• With no freezing
5-85%
90
80
70
60
50
40
30
20
10
15
10 20 27 30 35
Temperature (°C)
Revision B
Notes
40
19