Test Pattern Print - Epson Stylus PRO 7000 Service Manual

EPSON Stylus Pro 7000

TEST PATTERN PRINT

This function prints a test pattern plus certain printer information/settings that
you can refer to when performing printer adjustment procedures. For a list of
the information that is printed, see the following table.
Table 5-13. Printed Items in the Test Pattern
Item
Prints all of the check/test patterns that are available
Nozzle Check
from the "Adjustment" menu.
Prints a list of all the adjustable items from the
Adjustment Variables
"Adjustment" menu.
Adjustment
Description
Self-Diagnostic Mode Menus
To print the list of variable items you need to enter the printer's serial number
when prompted. The serial number is located on the back of the printer, next
to the power connector.
[SelecType]/
[Item]
Print: Nozzle Check
[Enter]
Printing Pattern
Print: Adj. Variable
No. X: PEG
Print Adj. Pattern
[SelecType]/
[Enter]
[Item]
Printing Pattern
parameter list, ejects the paper, and
Figure 5-39. Test Pattern Printing Operation
Revision B
adjustment/
next menu
Paper Feed [+] or [-]
* * * * * * * X = "1"~"4"
* = Serial number
The printer prints the adjustment-
proceeds to next menu.
End
192