Epson Stylus PRO 7000 Service Manual page 145

EPSON Stylus Pro 7000
When reassembling the Maintenance Bracket, be sure to lift up
the bracket as you secure the screws. Otherwise you may
Cause damage to the nozzle surface by scraping the
nozzle surface on the capping flag (no error message!)
Cause clogged nozzles and/or cause the printer to leak
ink if the cap and nozzle surface do not form a good seal
in the capping position; make sure both caps are tightly
sealed like the one on the left (no error message!).
Good seal
Disassembly & Assembly
No good; you can see
through the space between
the nozzle surface and cap
Disassembly Flow
Revision B
145