Console Port Speed - ZyXEL Communications UAG5100 User Manual

To get the UAG date and time from a time server
Click System > Date/Time.
1
Select Get from Time Server under Time and Date Setup.
2
Under Time Zone Setup, select your Time Zone from the list.
3
As an option you can select the Enable Daylight Saving check box to adjust the UAG clock for
4
daylight savings.
Under Time and Date Setup, enter a Time Server Address
5
Click Apply.
6

46.5 Console Port Speed

This section shows you how to set the console port speed when you connect to the UAG via the
console port using a terminal emulation program. See
settings.
Click Configuration > System > Console Speed to open the Console Speed screen.
Figure 331 Configuration > System > Console Speed
The following table describes the labels in this screen.
Table 234 Configuration > System > Console Speed
LABEL
Console Port Speed
Apply
Reset
Chapter 46 System
DESCRIPTION
Use the drop-down list box to change the speed of the console port. Your UAG supports
9600, 19200, 38400, 57600, and 115200 bps (default) for the console port.
The Console Port Speed applies to a console port connection using terminal emulation
software and NOT the Console in the UAG Web Configurator Status screen.
Click Apply to save your changes back to the UAG.
Click Reset to return the screen to its last-saved settings.
UAG Series User's Guide
492
(Table 233 on page
Table 2 on page 22 for default console port
491).