Address Group Add/Edit Screen - ZyXEL Communications UAG2100 User Manual

The following table describes the labels in this screen. See
information as well.
Table 155 Configuration > Object > Address > Address Group
LABEL
Configuration
Add
Edit
Remove
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
#
Name
Description

33.3.1 Address Group Add/Edit Screen

The Address Group Add/Edit screen allows you to create a new address group or edit an existing
one. To access this screen, go to the Address Group screen (see
click either the Add icon or an Edit icon in the Configuration section.
Figure 209 Address Group Configuration > Add
Chapter 33 Addresses
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
use the entry. See Section 10.3.2 on page 117
This field is a sequential value, and it is not associated with a specific address group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
UAG2100 User's Guide
317
Section 33.3.1 on page 317
for an example.
Section 33.3 on page
for more
316), and