The Ssl Global Setting Screen - ZyXEL Communications ZyWall USG20-VPN User Manual

Table 145 VPN > SSL VPN > Access Privilege > Add/Edit (continued)
LABEL
Network List
OK
Cancel

22.3 The SSL Global Setting Screen

Click VPN > SSL VPN and click the Global Setting tab to display the following screen. Use this
screen to set the IP address of the USG (or a gateway device) on your network for full tunnel mode
access, enter access messages or upload a custom logo to be displayed on the remote user screen.
Figure 243 VPN > SSL VPN > Global Setting
The following table describes the labels in this screen.
Table 146 VPN > SSL VPN > Global Setting
LABEL
Global Setting
Network
Extension Local
IP
Chapter 22 SSL VPN
DESCRIPTION
To allow user access to local network(s), select a network name in the Selectable
Address Objects list and click the right arrow button to add to the Selected Address
Objects list. You can select more than one network.
To block access to a network, select the network name in the Selected Address Objects
list and click the left arrow button.
Click OK to save the changes and return to the main Access Privilege screen.
Click Cancel to discard all changes and return to the main Access Privilege screen.
DESCRIPTION
Specify the IP address of the USG (or a gateway device) for full tunnel mode SSL VPN
access.
Leave this field to the default settings unless it conflicts with another interface.
USG20(W)-VPN Series User's Guide
373