The Port Statistics Screen; Table 36 Status > Dhcp Table - ZyXEL Communications ZyWALL USG 300 User Manual

Unified security gateway

Hide thumbs Also See for ZyWALL USG 300:

Table of Contents

Chapter 7 Status

The following table describes the labels in this screen.

Table 36 Status > DHCP Table

7.2.6 The Port Statistics Screen

Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen,

click Port Statistics in the Status screen.

Select for which interface you want to look at the IP addresses currently assigned

to DHCP clients and the IP addresses reserved for specific MAC addresses.

This field is a sequential value, and it is not associated with a specific entry.

This field displays the IP address currently assigned to a DHCP client or reserved

for a specific MAC address. Click the column's heading cell to sort the table entries

by IP address. Click the heading cell again to reverse the sort order.

This field displays the name used to identify this device on the network (the

computer name). The ZyWALL learns these from the DHCP client requests. "None"

shows here for a static DHCP entry.

This field displays the MAC address to which the IP address is currently assigned

or for which the IP address is reserved. Click the column's heading cell to sort the

table entries by MAC address. Click the heading cell again to reverse the sort

For a static DHCP entry, the host name or the description you configured shows

here. This field is blank for dynamic DHCP entries.

If this field is selected, this entry is a static DHCP entry. The IP address is reserved

for the MAC address.

If this field is clear, this entry is a dynamic DHCP entry. The IP address is assigned

to a DHCP client.

To create a static DHCP entry using an existing dynamic DHCP entry, select this

field, and then click Apply.

To remove a static DHCP entry, clear this field, and then click Apply.

Click this to save your settings to the ZyWALL.

Click this to update the screen immediately.

ZyWALL USG 300 User's Guide