Cleaning Your Model 730; Case And Display - Intermec 730 Quick Start Manual

The Battery may be critically low.Ensure that your computer has
been on a charger for at least five minutes, then remove from the
charger and press the I button. The display will then be ac-
tive.Continue to charge your mobile computer for 4 hours to ensure
that the battery is fully charged.
Model 730 will not turn On when placed in a dock
Ensure that the dock is plugged in and your computer is securely
seated in the dock.
Model 730 shuts down during operation
You may have a very low battery, try recharging the battery.
Model 730 does not turn Off
May not turn Off when it is processing data.
If this condition continues for a long period of time it will run down
the battery unless it is connected to external power.
In the rare event that your Model 730 locks up, do a Warm Reset
and if that doesn't resolve the problem then do a Cold Reset. See
page 18 for Cold Reset details.
Model 730 takes a long time to boot up after a reset
Normal time is between 30-45 seconds. If it takes longer than
this, contact support personnel.

Cleaning Your Model 730

Periodic cleaning helps maintain the appearance of
your Model 730. When cleaning your Model 730,
inspect the keyboard, covers, display, and connectors
for obvious signs of damage or wear.
Note: Do not use abrasive cleaning com-
pounds, alkaline compounds, ketonic sol-
vents (acetone or ketone) or aromatic sol-
vents (toluene or xylene) to clean any part
of your Model 730. These solutions cause
permanent damage.
Note: Never pour cleaners directly on the
display or the case. Instead put the cleans-
er on a soft cloth and gently wipe the
case.

Case and Display

We recommend cleaning the exterior of your mobile
computer using a soft cloth dampened with MICRO-
Model 730 Color Mobile Computer 19