Cleaning the CN3
CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
5 Continue to hold the Power button until a Warning message
appears on the display.
6 Release the Power button, read the message, and press either
button on the right side to continue.
7 Wait for the CN3 to load files from the miniSD card.
Note: You can also clean boot the CN3 using the SmartSystems
console. To clean boot the CN3 using the SmartSystems Console,
right-click on the CN3 and select Intermec Power Tools > Clean
Boot Device.
To keep the CN3 in good working order, you may need to clean the
imager window, color camera window, and the touch screen. Clean
the windows and the touch screen as often as needed for the
environment in which you are using the CN3. To clean the CN3, use a
solution of ammonia and water.
There are no user-serviceable parts inside the CN3. Opening the
CN3 will void the warranty and may cause damage to the internal
components.
To clean the imager window, camera window, and touch screen
1 Press the Power button to suspend the CN3.
2 Dip a clean cloth towel in the ammonia solution and wring out
the excess.
3 Wipe off the imager window, camera lens, and flash area. Do not
allow any abrasive material to touch these surfaces.
4 Wipe dry.
Chapter 4 — Troubleshooting and Maintaining the CN3
95