Cleaning The Scanner Window And Screen - Intermec CK3a User Manual

Cleaning the Scanner Window and Screen

CK3 Mobile Computer User's Manual
To clean boot the CK3
1 Remove the battery.
2 Use the stylus to press the reset button in the battery
compartment of the CK3.
3 Press and hold the Power button as you replace the battery.
4 Continue to hold the Power button until the "Clean boot the
system?" prompt appears on screen.
5 Release the Power button, read the message, and press the
appropriate button to either proceed with the clean boot or cancel
the clean boot.
To keep the CK3 in good working order, you may need to perform
these minor maintenance tasks:
• Clean the scanner window.
• Clean the CK3 screen.
Chapter 4 — Troubleshooting and Maintaining the CK3
Reset button
77