Connecting To A Bluetooth Scanner - Intermec CK3n User Manual

CK3 Mobile Computer User's Manual

Connecting to a Bluetooth Scanner

You can connect to an Intermec Bluetooth scanner, such as the SF51
or SR61, using one of these methods:
• Scan the association bar code label that ships with the CK3.
• Run the Wireless Scanning Wizard.
To connect to a Bluetooth scanner with the association label
1 Make sure that the Bluetooth radio on your CK3 is enabled and
that your CK3 is visible and connectable.
2 Make sure that your Bluetooth scanner is on.
3 With your Bluetooth scanner, scan the Bluetooth association bar
code label that ships with the CK3.
4 When prompted, enter the passcode for your scanner. The default
passcode for Intermec Bluetooth scanners is 0000.
5 Tap Finish.
To connect to a Bluetooth scanner with the Wireless Scanning Wizard
1 Select Start > Settings > the System tab > Wireless Scanning.
2 Follow the onscreen instructions to connect to a scanner.
Chapter 2 — Connecting and Configuring the CK3
31